2018 Bridgeview Pulldozer Land Scraper 1220

Newly upgraded for 2018, the 20-yard Pulldozer 1220 Ejector-Style Land Scraper!

The 1220 comes loaded with smart features. Strategically placed high-strength and hardened steel is meant to last for the life of the machine. The high-backed ejector plate prevents rocks from wedging between the tires and frame. Clever hydraulic hose and cylinder concealment and a clean, smooth design prevent protect the most sensitive components of the scraper.

No piece of equipment takes as much abuse as a scraper; big rocks and hard pulling test these earth-movers during every moment of their operation. With this philosophy in mind, Bridgeview designed every aspect of the 1220 for absolute dependability.

• The 1220 features a 20-yard hopper and 12' cutting width. The high-backed ejector helps prevent rocks from jamming between the frame and tires and protects the cylinder compartment from material buildup.

• The standard GPS Tower sits directly over the blade, meaning that only an elevation correction in software is needed. The tower is easily removed to accommodate excavator filling if desired.

• The standard nitrogen-filled hydraulic dampener provides a better ride for the operator and smoother cylinder function.

• Twin 875/65R29 tires reject mud buildup better than 4- or 6-wheeled scrapers. The 132" outside tire width floats gives good stability on slopes and uneven ground.

• The tail sections removable panel allows easy pressure-washing of the cylinder compartment. The open tail bottom permits total cleanout.

• The heavy-duty 3" ejection cylinder pushes the ejector plate slightly past the blade edge for total hopper cleanout. Ultra-High Molecular Weight Polyethylene (UHMW-PE) bearing surfaces reduce metal-on-metal sliding contact and resist jamming by gravel. Ejector/apron sequencing is automatic on one remote.

• Twin 2" apron cylinders are shielded from rock impact yet remain accessible for quick inspections. The frame tubing access panels are easily removed for fast checks of the internally-routed hydraulics.

• The standard replaceable dropped-center serrated blades pull the center of the 1220 deeper and more evenly into the ground. Straight blades are also available as standard.

• The strategically-placed hardened steel of the 20-yard hopper is protected by high quality powder-coat paint. The clean-faced internal design prevents snagging damage when ejecting big rocks or gravel.

• Like all pins on the 1220, the 3-5/8" cold-rolled lift pivot pin will withstand loads far exceeding those expected in the harshest operating conditions.

• Standard 1/2" Male Ag Tips (Pioneer Style) come installed, with the option of 3/4" tips. Two hydraulic remotes are required: one for tilt, and one for the combined ejection/apron circuit.

• The six-way semi-mount provides a wide range of motion.

• Unlike other scraper hitches, the standard 1220 hitch allows easy yoke connections while installed, saving significant time when changing implements. Tractor hitch adaptors for numerous popular models are available.